Allen Bradley Guardmaster 440C-CR30 Series Safety Controller, 22 Safety Inputs, 4 Safety Outputs, 24 V dc

RS Stock No.: 890-2982Brand: Allen Bradley GuardmasterManufacturers Part No.: 440C-CR30-STARTERPACK1IMPA: 0
brand-logo

Technical Document

Specifications

Expansion Available

Yes

Number of Safety Outputs

4

Number of Safety Inputs

22

IP Rating

IP20

Field Bus Communication Type

ModBus

Contact Current Rating

11.1 mA

Safety Category

4

Terminal Type

Screw

Supply Voltage

24 V dc

Depth

80mm

Width

90mm

Length

100mm

Dimensions

100 x 90 x 80 mm

Series

440C-CR30

Country of Origin

Germany

Product details

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762

Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >400 kΩ
Continuity testing
Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ
Phase rotation, 2-wire method
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

801.460 OMR

Each (ex VAT)

841.533 OMR

Each (inc VAT)

Allen Bradley Guardmaster 440C-CR30 Series Safety Controller, 22 Safety Inputs, 4 Safety Outputs, 24 V dc

801.460 OMR

Each (ex VAT)

841.533 OMR

Each (inc VAT)

Allen Bradley Guardmaster 440C-CR30 Series Safety Controller, 22 Safety Inputs, 4 Safety Outputs, 24 V dc
Stock information temporarily unavailable.

Technical Document

Specifications

Expansion Available

Yes

Number of Safety Outputs

4

Number of Safety Inputs

22

IP Rating

IP20

Field Bus Communication Type

ModBus

Contact Current Rating

11.1 mA

Safety Category

4

Terminal Type

Screw

Supply Voltage

24 V dc

Depth

80mm

Width

90mm

Length

100mm

Dimensions

100 x 90 x 80 mm

Series

440C-CR30

Country of Origin

Germany

Product details

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762

Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >400 kΩ
Continuity testing
Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ
Phase rotation, 2-wire method
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.