Alps Alpine Incremental Incremental Encoder, 15 ppr, Solid Type, 6mm Shaft
Technical Document
Specifications
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Brand
Alps AlpineMounting Type
Panel Mount
Supply Voltage
5 V dc
Country of Origin
Japan
Product details
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Features & Benefits
A stand alone drive board designed to drive a stepper motor in unipolar mode.
Directly compatible with any of the RS stepper motors up to 2A
4-phase unipolar motor drive up to 2A/40Vdc per phase
Full, half and wave modes selectable
Motor speed selectable via adjustable on-board clock or externally via logic connectors
Enable and disable inputs allow a variety of start/stop control options to be implemented
Logic input/outputs TTL LS and CMOS compatible
Open drain power MOSFET phase outputs
Supplied with
User instructions
Stock information temporarily unavailable.
Please check again later.
2.125 OMR
Each (In a Pack of 5) (ex VAT)
2.231 OMR
Each (In a Pack of 5) (inc VAT)
5
2.125 OMR
Each (In a Pack of 5) (ex VAT)
2.231 OMR
Each (In a Pack of 5) (inc VAT)
5
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 5 - 20 | 2.125 OMR | 10.625 OMR |
| 25 - 95 | 1.870 OMR | 9.350 OMR |
| 100 - 245 | 1.635 OMR | 8.175 OMR |
| 250 - 495 | 1.530 OMR | 7.650 OMR |
| 500+ | 1.455 OMR | 7.275 OMR |
Technical Document
Specifications
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Brand
Alps AlpineMounting Type
Panel Mount
Supply Voltage
5 V dc
Country of Origin
Japan
Product details
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Features & Benefits
A stand alone drive board designed to drive a stepper motor in unipolar mode.
Directly compatible with any of the RS stepper motors up to 2A
4-phase unipolar motor drive up to 2A/40Vdc per phase
Full, half and wave modes selectable
Motor speed selectable via adjustable on-board clock or externally via logic connectors
Enable and disable inputs allow a variety of start/stop control options to be implemented
Logic input/outputs TTL LS and CMOS compatible
Open drain power MOSFET phase outputs
Supplied with
User instructions