Technical Document
Specifications
Brand
Phoenix ContactNumber of Channels
1
Supply Voltage
18 to 32 V dc
Safety Voltage Maximum
24 V dc
Safety Current Resistance
5.07Ω
Safety Current Maximum
2A
Signal Type
Analogue
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Series
ECP 1-2
Operating Temperature Range
0 to +50 °C
Country of Origin
Germany
Product details
ECP Series - Phoenix Contact Circuit Breakers
ECP series selective circuit breaker which can be plugged in TMCP socket, signalling by two-colour LED, floating signal contact, on/off pushbutton.
Design width of just 12.5 mm
Capacitive loads can be switched on and loads are only switched off in the event of an overload or short circuit
Selective protection of all 24V dc load circuits at switched-mode power supply units
Operating or error state indicated by LED and integrated signal contacts
Combination of active electronic current limitation and proven circuit breaker technology including electrical isolation
Residual current always limited to 1.8 times the nominal current
Stock information temporarily unavailable.
Please check again later.
0.625 OMR
Each (ex VAT)
0.656 OMR
Each (inc VAT)
1
0.625 OMR
Each (ex VAT)
0.656 OMR
Each (inc VAT)
1
Technical Document
Specifications
Brand
Phoenix ContactNumber of Channels
1
Supply Voltage
18 to 32 V dc
Safety Voltage Maximum
24 V dc
Safety Current Resistance
5.07Ω
Safety Current Maximum
2A
Signal Type
Analogue
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Series
ECP 1-2
Operating Temperature Range
0 to +50 °C
Country of Origin
Germany
Product details
ECP Series - Phoenix Contact Circuit Breakers
ECP series selective circuit breaker which can be plugged in TMCP socket, signalling by two-colour LED, floating signal contact, on/off pushbutton.
Design width of just 12.5 mm
Capacitive loads can be switched on and loads are only switched off in the event of an overload or short circuit
Selective protection of all 24V dc load circuits at switched-mode power supply units
Operating or error state indicated by LED and integrated signal contacts
Combination of active electronic current limitation and proven circuit breaker technology including electrical isolation
Residual current always limited to 1.8 times the nominal current