TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter
Technical Document
Specifications
Brand
TE ConnectivityMinimum Cable Diameter
1.5mm
Maximum Cable Diameter
4.8mm
Sleeve Length
29.3mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Country of Origin
Mexico
Product details
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
32.450 OMR
0.324 OMR Each (In a Pack of 100) (ex VAT)
34.072 OMR
0.340 OMR Each (In a Pack of 100) (inc. VAT)
100
32.450 OMR
0.324 OMR Each (In a Pack of 100) (ex VAT)
34.072 OMR
0.340 OMR Each (In a Pack of 100) (inc. VAT)
100
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price | Per Pack |
|---|---|---|
| 100 - 1400 | 0.324 OMR | 32.450 OMR |
| 1500 - 4900 | 0.308 OMR | 30.800 OMR |
| 5000+ | 0.292 OMR | 29.150 OMR |
Technical Document
Specifications
Brand
TE ConnectivityMinimum Cable Diameter
1.5mm
Maximum Cable Diameter
4.8mm
Sleeve Length
29.3mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Country of Origin
Mexico
Product details
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.