Huco Reducing Bush 259.31, 9.5mm Shaft Diameter, 12.7mm Outside Diameter
Technical Document
Specifications
Brand
HucoShaft Diameter
9.5mm
Outside Diameter
12.7mm
Length
10.7mm
Material
Aluminium Alloy
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Country of Origin
United Kingdom
Product details
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C
Stock information temporarily unavailable.
Please check again later.
3.820 OMR
Each (In a Pack of 2) (ex VAT)
4.011 OMR
Each (In a Pack of 2) (inc. VAT)
2
3.820 OMR
Each (In a Pack of 2) (ex VAT)
4.011 OMR
Each (In a Pack of 2) (inc. VAT)
2
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 2 - 8 | 3.820 OMR | 7.640 OMR |
| 10 - 18 | 3.675 OMR | 7.350 OMR |
| 20 - 48 | 3.625 OMR | 7.250 OMR |
| 50+ | 3.595 OMR | 7.190 OMR |
Technical Document
Specifications
Brand
HucoShaft Diameter
9.5mm
Outside Diameter
12.7mm
Length
10.7mm
Material
Aluminium Alloy
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Country of Origin
United Kingdom
Product details
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C