ifm electronic Threaded Barrel Proximity Sensor, M30, 10 mm Detection, 10 → 36 V dc
Technical Document
Specifications
Brand
ifm electronicThread Size
M30
Body Style
Threaded Barrel
Detection Range
10 mm
Supply Voltage
10 → 36 V dc
IP Rating
IP67
Length
81mm
Mounting Type
Flush
Housing Material
PBT
Maximum dc Voltage
36V
Minimum Operating Temperature
-25°C
Switching Current
250 mA
Reverse Polarity Protection
Yes
Short Circuit Overload Protection
Yes
Maximum Operating Temperature
+80°C
Country of Origin
Germany
Product details
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.
P.O.A.
1
P.O.A.
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
ifm electronicThread Size
M30
Body Style
Threaded Barrel
Detection Range
10 mm
Supply Voltage
10 → 36 V dc
IP Rating
IP67
Length
81mm
Mounting Type
Flush
Housing Material
PBT
Maximum dc Voltage
36V
Minimum Operating Temperature
-25°C
Switching Current
250 mA
Reverse Polarity Protection
Yes
Short Circuit Overload Protection
Yes
Maximum Operating Temperature
+80°C
Country of Origin
Germany
Product details
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.