RS PRO Zinc plated & clear Passivated Steel Hex, Hex Bolt, M4 x 35mm
Technical Document
Specifications
Steel Type
High Tensile Steel
Range
Nbio
Thread Pitch
0.7mm
For Use With
EMEXIT Dvojitě zakódovaný znak nouzového východu LED
Thread Size
M4
Finish
Zinc plated & clear Passivated
Length
35mm
Material
Steel
Brand
RS ProProduct details
DRV8412-C2 Evaluation Kit
The DRV8412 evaluation kit (DRV8412-C2-KIT) includes everything needed to drive two brushed DC or a single stepper motor out of the box.
DRV8412 power module base board with controlCARD interface (2 x H-Bridge)
C2000 Piccolo F28035 controlCARD (pre-flashed with code to drive all motors using a GUI)
Isolated XDS100 Emulation and Serial Connectivity
Brushed DC and stepper motors running up to 6A continuous / 12A peak at 50V
Supplied with
2 x brushed DC motors (38mm), 1 x stepper motor (23Y square), 24V power supply, USB cable, wiring for motors, USB stick with Quick Start GUI, documentation, and CCStudio v4.x Integrated Development Environment.
Motor Controllers & Drivers, Texas Instruments
Stock information temporarily unavailable.
Please check again later.
5.300 OMR
1 Bag of 100 (ex VAT)
5.565 OMR
1 Bag of 100 (inc VAT)
1
5.300 OMR
1 Bag of 100 (ex VAT)
5.565 OMR
1 Bag of 100 (inc VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | 5.300 OMR |
| 5 - 9 | 5.160 OMR |
| 10 - 29 | 5.025 OMR |
| 30+ | 4.840 OMR |
Technical Document
Specifications
Steel Type
High Tensile Steel
Range
Nbio
Thread Pitch
0.7mm
For Use With
EMEXIT Dvojitě zakódovaný znak nouzového východu LED
Thread Size
M4
Finish
Zinc plated & clear Passivated
Length
35mm
Material
Steel
Brand
RS ProProduct details
DRV8412-C2 Evaluation Kit
The DRV8412 evaluation kit (DRV8412-C2-KIT) includes everything needed to drive two brushed DC or a single stepper motor out of the box.
DRV8412 power module base board with controlCARD interface (2 x H-Bridge)
C2000 Piccolo F28035 controlCARD (pre-flashed with code to drive all motors using a GUI)
Isolated XDS100 Emulation and Serial Connectivity
Brushed DC and stepper motors running up to 6A continuous / 12A peak at 50V
Supplied with
2 x brushed DC motors (38mm), 1 x stepper motor (23Y square), 24V power supply, USB cable, wiring for motors, USB stick with Quick Start GUI, documentation, and CCStudio v4.x Integrated Development Environment.