SKF Speedi-Sleeve Bearing Speed Sleeve For Use With Radial Shaft Seals, 99254
Technical Document
Specifications
Brand
SKFType
Bearing Speed Sleeve
Inner Diameter
65mm
Outer Diameter
72.39mm
Dimensions
65 x 72.39 x 22.99mm
Series
SPEEDI-SLEEVE
For Use With
Radial Shaft Seals
Product details
SPEEDI-SLEEVE
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds or inadequate lubrication.
Shafts can be up and running within minutes, at a fraction of the cost of traditional reworking. The standard SPEEDI-SLEEVES size range covers shaft diameters from 11.91 to 203.33mm (0.472 to 8 in)
Each SPEEDI-SLEEVE, metric or imperial, is designed to fit a specific shaft range, usually above and below the nominal shaft diameter. This permits some flexibility to accommodate variations in the actual shaft size
SPEEDI-SLEEVES are made of stainless steel and their extremely thin walls (0.28mm/.011 in.) allow users to retain the original seal size. All SPEEDI-SLEEVES feature a removable installation flange for easy mounting using a tool supplied with each sleeve
The flange can be retained or removed (if necessary) for clearance purposes - a pre-cut tear-groove is provided
Shaft Repair
22.858 OMR
22.858 OMR Each (ex VAT)
24.001 OMR
24.001 OMR Each (inc. VAT)
1
22.858 OMR
22.858 OMR Each (ex VAT)
24.001 OMR
24.001 OMR Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price |
|---|---|
| 1 - 4 | 22.858 OMR |
| 5 - 9 | 21.945 OMR |
| 10+ | 21.483 OMR |
Technical Document
Specifications
Brand
SKFType
Bearing Speed Sleeve
Inner Diameter
65mm
Outer Diameter
72.39mm
Dimensions
65 x 72.39 x 22.99mm
Series
SPEEDI-SLEEVE
For Use With
Radial Shaft Seals
Product details
SPEEDI-SLEEVE
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds or inadequate lubrication.
Shafts can be up and running within minutes, at a fraction of the cost of traditional reworking. The standard SPEEDI-SLEEVES size range covers shaft diameters from 11.91 to 203.33mm (0.472 to 8 in)
Each SPEEDI-SLEEVE, metric or imperial, is designed to fit a specific shaft range, usually above and below the nominal shaft diameter. This permits some flexibility to accommodate variations in the actual shaft size
SPEEDI-SLEEVES are made of stainless steel and their extremely thin walls (0.28mm/.011 in.) allow users to retain the original seal size. All SPEEDI-SLEEVES feature a removable installation flange for easy mounting using a tool supplied with each sleeve
The flange can be retained or removed (if necessary) for clearance purposes - a pre-cut tear-groove is provided