SKF HK 5020 50mm I.D Needle Needle Roller Bearing, 58mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
50mm
Outside Diameter
58mm
Roller Bearing Type
Needle
Race Width
20mm
Bore Type
Parallel
Material
Metal
Static Load Rating
63kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
29.2kN
End Type
Open
Limiting Speed
5600rpm
Reference Speed
5000rpm
Maximum Speed - Oil
5600rpm
Maximum Speed - Grease
4000rpm
Fatigue Limit Load
7.8kN
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
8.888 OMR
8.888 OMR Each (ex VAT)
9.332 OMR
9.332 OMR Each (inc. VAT)
1
8.888 OMR
8.888 OMR Each (ex VAT)
9.332 OMR
9.332 OMR Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price |
|---|---|
| 1 - 4 | 8.888 OMR |
| 5 - 9 | 8.558 OMR |
| 10 - 24 | 8.530 OMR |
| 25+ | 8.470 OMR |
Technical Document
Specifications
Brand
SKFInside Diameter
50mm
Outside Diameter
58mm
Roller Bearing Type
Needle
Race Width
20mm
Bore Type
Parallel
Material
Metal
Static Load Rating
63kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
29.2kN
End Type
Open
Limiting Speed
5600rpm
Reference Speed
5000rpm
Maximum Speed - Oil
5600rpm
Maximum Speed - Grease
4000rpm
Fatigue Limit Load
7.8kN
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required