TE Connectivity Transparent Polyolefin Solder Sleeve 45.5mm Length 6.5 → 15.1mm Cable Diameter
Technical Document
Specifications
Brand
TE ConnectivityMinimum Cable Diameter
6.5mm
Maximum Cable Diameter
15.1mm
Sleeve Length
45.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
3
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Country of Origin
Mexico
Product details
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
61.710 OMR
61.710 OMR 1 Pack of 25 (ex VAT)
64.796 OMR
64.796 OMR 1 Pack of 25 (inc. VAT)
1
61.710 OMR
61.710 OMR 1 Pack of 25 (ex VAT)
64.796 OMR
64.796 OMR 1 Pack of 25 (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price |
|---|---|
| 1 - 14 | 61.710 OMR |
| 15 - 49 | 58.636 OMR |
| 50+ | 55.534 OMR |
Technical Document
Specifications
Brand
TE ConnectivityMinimum Cable Diameter
6.5mm
Maximum Cable Diameter
15.1mm
Sleeve Length
45.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
3
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Country of Origin
Mexico
Product details
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.