SKF HK 1012 10mm I.D Needle Roller Bearing, 14mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
10mm
Outside Diameter
14mm
Roller Bearing Type
Needle
Race Width
12mm
Bore Type
Parallel
Material
Metal
Static Load Rating
6.95kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
5.39kN
End Type
Open
Reference Speed
18000rpm
Limiting Speed
20000rpm
Maximum Speed - Grease
16000rpm
Maximum Speed - Oil
24000rpm
Fatigue Limit Load
780N
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Stock information temporarily unavailable.
Please check again later.
2.350 OMR
Each (ex VAT)
2.468 OMR
Each (inc. VAT)
1
2.350 OMR
Each (ex VAT)
2.468 OMR
Each (inc. VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | 2.350 OMR |
| 5 - 9 | 2.275 OMR |
| 10 - 24 | 2.250 OMR |
| 25+ | 2.240 OMR |
Technical Document
Specifications
Brand
SKFInside Diameter
10mm
Outside Diameter
14mm
Roller Bearing Type
Needle
Race Width
12mm
Bore Type
Parallel
Material
Metal
Static Load Rating
6.95kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
5.39kN
End Type
Open
Reference Speed
18000rpm
Limiting Speed
20000rpm
Maximum Speed - Grease
16000rpm
Maximum Speed - Oil
24000rpm
Fatigue Limit Load
780N
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required