Assemtech Change Over Reed Switch
Technical Document
Specifications
Brand
AssemtechContact Configuration
Change Over
Contact Resistance
100mΩ
Contact Material
Rhodium
AT Value Range
40-60 / 60-80 / 80-100AT
Width
5.6 (Dia.)mm
Length
36mm
Dimensions
5.6 (Dia.) x 36mm
Country of Origin
Belgium
Product details
Form A & C Reed Switch Kits
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
Features
Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically
Stock information temporarily unavailable.
Please check again later.
18.300 OMR
1 Kit (ex VAT)
19.215 OMR
1 Kit (inc VAT)
1
18.300 OMR
1 Kit (ex VAT)
19.215 OMR
1 Kit (inc VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 9 | 18.300 OMR |
| 10 - 24 | 17.845 OMR |
| 25 - 49 | 17.385 OMR |
| 50 - 199 | 16.935 OMR |
| 200+ | 16.470 OMR |
Technical Document
Specifications
Brand
AssemtechContact Configuration
Change Over
Contact Resistance
100mΩ
Contact Material
Rhodium
AT Value Range
40-60 / 60-80 / 80-100AT
Width
5.6 (Dia.)mm
Length
36mm
Dimensions
5.6 (Dia.) x 36mm
Country of Origin
Belgium
Product details
Form A & C Reed Switch Kits
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
Features
Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically