LCBSB-10-01A2-RT, 15.9mm High Nylon PCB Support for 3.18mm PCB Hole, 17.8 x 17.8mm Base
Technical Document
Specifications
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
26.1mm
Body Height
15.9mm
Support Base Dimensions
17.8 x 17.8mm
PCB Hole Diameter
3.18mm
PCB Thickness
1.6mm
Material
Nylon
Support Base Length
17.8mm
Support Base Width
17.8mm
Country of Origin
United Kingdom
Product details
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
7.260 OMR
0.182 OMR Each (In a Pack of 40) (ex VAT)
7.623 OMR
0.191 OMR Each (In a Pack of 40) (inc. VAT)
40
7.260 OMR
0.182 OMR Each (In a Pack of 40) (ex VAT)
7.623 OMR
0.191 OMR Each (In a Pack of 40) (inc. VAT)
40
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price | Per Pack |
|---|---|---|
| 40 - 360 | 0.182 OMR | 7.260 OMR |
| 400 - 760 | 0.176 OMR | 7.040 OMR |
| 800 - 1960 | 0.176 OMR | 7.040 OMR |
| 2000+ | 0.160 OMR | 6.380 OMR |
Technical Document
Specifications
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
26.1mm
Body Height
15.9mm
Support Base Dimensions
17.8 x 17.8mm
PCB Hole Diameter
3.18mm
PCB Thickness
1.6mm
Material
Nylon
Support Base Length
17.8mm
Support Base Width
17.8mm
Country of Origin
United Kingdom
Product details
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm