Technical Document
Specifications
Brand
HucoShaft Diameter
9.5mm
Outside Diameter
12.7mm
Length
10.7mm
Material
Aluminium Alloy
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Country of Origin
United Kingdom
Product details
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C
Stock information temporarily unavailable.
Please check again later.
3.510 OMR
Each (In a Pack of 2) (ex VAT)
3.686 OMR
Each (In a Pack of 2) (inc VAT)
2
3.510 OMR
Each (In a Pack of 2) (ex VAT)
3.686 OMR
Each (In a Pack of 2) (inc VAT)
2
Buy in bulk
quantity | Unit price | Per Pack |
---|---|---|
2 - 8 | 3.510 OMR | 7.020 OMR |
10 - 18 | 3.375 OMR | 6.750 OMR |
20 - 48 | 3.305 OMR | 6.610 OMR |
50+ | 3.225 OMR | 6.450 OMR |
Technical Document
Specifications
Brand
HucoShaft Diameter
9.5mm
Outside Diameter
12.7mm
Length
10.7mm
Material
Aluminium Alloy
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+120°C
Country of Origin
United Kingdom
Product details
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C