ITT Cannon, TNASize 14 Straight Circular Connector Backshell With Strain Relief, For Use With Neptune Circular
Technical Document
Specifications
Brand
ITT CannonFor Use With
Neptune Circular Connector, TNM Circular Connector
Shell Size
14
Body Orientation
Straight
Housing Material
Polymer
Length
67.1 mm, 80.5 mm
Strain Relief
Yes
Series
TNA
Country of Origin
Hungary
Product details
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
3.614 OMR
3.614 OMR Each (ex VAT)
3.795 OMR
3.795 OMR Each (inc. VAT)
1
3.614 OMR
3.614 OMR Each (ex VAT)
3.795 OMR
3.795 OMR Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| Quantity | Unit price |
|---|---|
| 1 - 19 | 3.614 OMR |
| 20 - 39 | 3.272 OMR |
| 40+ | 3.014 OMR |
Technical Document
Specifications
Brand
ITT CannonFor Use With
Neptune Circular Connector, TNM Circular Connector
Shell Size
14
Body Orientation
Straight
Housing Material
Polymer
Length
67.1 mm, 80.5 mm
Strain Relief
Yes
Series
TNA
Country of Origin
Hungary
Product details
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.