Technical Document
Specifications
Brand
ITT CannonPitch
5.08mm
Number Of Contacts
6
Number Of Rows
2
Body Orientation
Straight
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Current Rating
13.0A
Voltage Rating
250.0 V
Voltage Rating
250 V ac
Gender
Male
Country of Origin
Hungary
Product details
PCB Mount (Pin)
Complete with turned pin contacts these connectors will mount directly on to a PCB. Contacts are spaced at 0.2in. pitch. They will latch with cable shells, type A
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Stock information temporarily unavailable.
Please check again later.
3.275 OMR
Each (ex VAT)
3.439 OMR
Each (inc. VAT)
1
3.275 OMR
Each (ex VAT)
3.439 OMR
Each (inc. VAT)
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 19 | 3.275 OMR |
20 - 39 | 3.005 OMR |
40+ | 2.750 OMR |
Technical Document
Specifications
Brand
ITT CannonPitch
5.08mm
Number Of Contacts
6
Number Of Rows
2
Body Orientation
Straight
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Current Rating
13.0A
Voltage Rating
250.0 V
Voltage Rating
250 V ac
Gender
Male
Country of Origin
Hungary
Product details
PCB Mount (Pin)
Complete with turned pin contacts these connectors will mount directly on to a PCB. Contacts are spaced at 0.2in. pitch. They will latch with cable shells, type A
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)