Technical Document
Specifications
Brand
MicrochipModule Type
Transceiver
Supported Frequency Bands
902 → 928MHz
Maximum Output Power
+18.5dBm
Receiver Sensitivity
-146dBm
Supported Bus Interfaces
UART
Supply Voltage
2.1 → 3.6V
Dimensions
26.7 x 17.8 x 3.34mm
Height
3.34mm
Length
26.7mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
17.78mm
Product details
RN2903 LoRa 915MHz RF Transceiver Module
The Microchip RN2903 is a low-power long range transceiver module based on wireless LoRa® technology. The module contains an integrated MCU, crystal, EUI-64 node identity, serial EEPROM, RF wireless transceiver with analogue front end and matching circuitry, and is fully-certified for 915 MHz wireless operation. A unique spread spectrum modulation process within the sub-GHz band is utilised to enable long range, low power, and high network capacity. When used with an external host MCU the RN2903 module is suitable for simple long-range sensor and IoT applications.
On-board LoRaWAN™ Class A protocol stack
FSK, GFSK, and LoRa® technology modulation
ASCII command interface over UART
Compact form factor 17.8 x 26.7 x 3 mm
Castellated SMT pads for easy and reliable PCB mounting
Single Operating Voltage: 2.1 to 3.6V (3.3V typical)
Device Firmware Upgrade (DFU) over UART
14 GPIO for control, status, and ADC
Environmentally friendly, RoHS compliant
FCC and IC Certified
Wireless Modules - Microchip
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
MicrochipModule Type
Transceiver
Supported Frequency Bands
902 → 928MHz
Maximum Output Power
+18.5dBm
Receiver Sensitivity
-146dBm
Supported Bus Interfaces
UART
Supply Voltage
2.1 → 3.6V
Dimensions
26.7 x 17.8 x 3.34mm
Height
3.34mm
Length
26.7mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
17.78mm
Product details
RN2903 LoRa 915MHz RF Transceiver Module
The Microchip RN2903 is a low-power long range transceiver module based on wireless LoRa® technology. The module contains an integrated MCU, crystal, EUI-64 node identity, serial EEPROM, RF wireless transceiver with analogue front end and matching circuitry, and is fully-certified for 915 MHz wireless operation. A unique spread spectrum modulation process within the sub-GHz band is utilised to enable long range, low power, and high network capacity. When used with an external host MCU the RN2903 module is suitable for simple long-range sensor and IoT applications.
On-board LoRaWAN™ Class A protocol stack
FSK, GFSK, and LoRa® technology modulation
ASCII command interface over UART
Compact form factor 17.8 x 26.7 x 3 mm
Castellated SMT pads for easy and reliable PCB mounting
Single Operating Voltage: 2.1 to 3.6V (3.3V typical)
Device Firmware Upgrade (DFU) over UART
14 GPIO for control, status, and ADC
Environmentally friendly, RoHS compliant
FCC and IC Certified