Molex Premise Networks ST to SC Duplex Multi Mode OM3 Fibre Optic Cable, 50/125μm, Aqua, 1m
Technical Document
Specifications
Connector 1
ST
Length
1m
Connector 2
SC
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Sheath Colour
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Maximum Operating Temperature
+85°C
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Attenuation
1.5 dB
Series
91
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3
13.030 OMR
13.030 OMR Each (ex VAT)
13.681 OMR
13.681 OMR Each (inc. VAT)
1
13.030 OMR
13.030 OMR Each (ex VAT)
13.681 OMR
13.681 OMR Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| Quantity | Unit price |
|---|---|
| 1 - 14 | 13.030 OMR |
| 15 - 49 | 12.238 OMR |
| 50+ | 11.693 OMR |
Technical Document
Specifications
Connector 1
ST
Length
1m
Connector 2
SC
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Sheath Colour
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Maximum Operating Temperature
+85°C
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Attenuation
1.5 dB
Series
91
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3