Molex Premise Networks ST to SC Duplex Multi Mode OM3 Fibre Optic Cable, 50/125μm, Aqua, 3m
Technical Document
Specifications
Length
3m
Connector 1
ST
Propagation Mode
Multi Mode
Connector 2
SC
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Sheath Colour
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Maximum Operating Temperature
+85°C
Attenuation
1.5 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Maximum Pulling Tension
100N
Series
91
Minimum Bend Radius
30 mm
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3
14.355 OMR
14.355 OMR Each (ex VAT)
15.073 OMR
15.073 OMR Each (inc. VAT)
1
14.355 OMR
14.355 OMR Each (ex VAT)
15.073 OMR
15.073 OMR Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| Quantity | Unit price |
|---|---|
| 1 - 14 | 14.355 OMR |
| 15 - 49 | 13.690 OMR |
| 50+ | 13.090 OMR |
Technical Document
Specifications
Length
3m
Connector 1
ST
Propagation Mode
Multi Mode
Connector 2
SC
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Sheath Colour
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Maximum Operating Temperature
+85°C
Attenuation
1.5 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Maximum Pulling Tension
100N
Series
91
Minimum Bend Radius
30 mm
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3