Technical Document
Specifications
Type
Switch Mode
Type
Switched Mode
Output Voltage
24V dc
Output Current
5A
AC or DC Output Voltage
dc
Input Voltage
230V ac
Power Rating
120W
Electrical Phase
1
Number of Outputs
1
Height
123mm
Width
50mm
Depth
138mm
Series
EMPARRO
Maximum Temperature
+60°C
Standards Met
cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47
Mounting Type
DIN Rail Mount
Minimum Temperature
-25°C
Ripple And Noise
50mV ac
MTBF
>500000h
Output Voltage Adjustment Range
24 → 28V
Special Features
Efficient, Reliable, Rugged
Country of Origin
Czech Republic
Product details
Emparro Power Supply 1 and 3 Phase
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.
Features and Benefits
150% power boost for at least 4 seconds
Slim design
Metal housing with protective EMC characteristics
High mains failure bridging time
Derating only at 60°C
Seven different models provide solutions for many applications
Efficiency up to 95%
Product Application Information
The wide input voltage range makes Emparro suitable for worldwide use.
Switch Mode - Murrelektronik
Stock information temporarily unavailable.
Please check again later.
93.755 OMR
Each (ex VAT)
98.443 OMR
Each (inc VAT)
1
93.755 OMR
Each (ex VAT)
98.443 OMR
Each (inc VAT)
1
Technical Document
Specifications
Type
Switch Mode
Type
Switched Mode
Output Voltage
24V dc
Output Current
5A
AC or DC Output Voltage
dc
Input Voltage
230V ac
Power Rating
120W
Electrical Phase
1
Number of Outputs
1
Height
123mm
Width
50mm
Depth
138mm
Series
EMPARRO
Maximum Temperature
+60°C
Standards Met
cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47
Mounting Type
DIN Rail Mount
Minimum Temperature
-25°C
Ripple And Noise
50mV ac
MTBF
>500000h
Output Voltage Adjustment Range
24 → 28V
Special Features
Efficient, Reliable, Rugged
Country of Origin
Czech Republic
Product details
Emparro Power Supply 1 and 3 Phase
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.
Features and Benefits
150% power boost for at least 4 seconds
Slim design
Metal housing with protective EMC characteristics
High mains failure bridging time
Derating only at 60°C
Seven different models provide solutions for many applications
Efficiency up to 95%
Product Application Information
The wide input voltage range makes Emparro suitable for worldwide use.