Parallax Inc Robot Arm
Technical Document
Specifications
Product details
Arlo Mobile Robot Wheel Kit
The Parallax motor mount is the wheel kit for the other two kits. This motor is the aluminium version so it provides a toughened chassis over the plastic. It can hold a total of 27kg with rugged tyres. Two independent motors drive the wheels so you can get the odometry feedback of your choice.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
Features and benefits:
• Aluminium makes for a tough chassis with an increased payload support.
• 36-step optical slotted disk with quadrature output on each axle.
• Rugged inner-tubed tyres pneumatic tyres
• Maximum payload of 27KG
• Torque of 85lbs per motor assembly
• Wheel rotation with no load: 100rpm
What’s in the kit?
• Two 12 VDC Motors. (Left & Right)
• 36 Position quadrature encoder set
• Two motor bearing blocks.
• Two Main rims
• Two rim rings
• Two robot drive axle’s
• Two 1/8 x 1” Roll Pink
• Two Knobby tires with rubber tube
• Two 0.5 ID x 1.125” OD Ball Bearing
• Two Hex keys (5mm & 5/32”)
• All screws and spacers.
This is only the wheel kit, to have a fully functioning robot you will need the below kits.
Base Kit: 8430822
Top Kit: 8430796
Supplied with
All necessary screws and spacers
Stock information temporarily unavailable.
Please check again later.
177.165 OMR
Each (ex VAT)
186.023 OMR
Each (inc. VAT)
1
177.165 OMR
Each (ex VAT)
186.023 OMR
Each (inc. VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 1 | 177.165 OMR |
| 2+ | 174.735 OMR |
Technical Document
Specifications
Product details
Arlo Mobile Robot Wheel Kit
The Parallax motor mount is the wheel kit for the other two kits. This motor is the aluminium version so it provides a toughened chassis over the plastic. It can hold a total of 27kg with rugged tyres. Two independent motors drive the wheels so you can get the odometry feedback of your choice.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
Features and benefits:
• Aluminium makes for a tough chassis with an increased payload support.
• 36-step optical slotted disk with quadrature output on each axle.
• Rugged inner-tubed tyres pneumatic tyres
• Maximum payload of 27KG
• Torque of 85lbs per motor assembly
• Wheel rotation with no load: 100rpm
What’s in the kit?
• Two 12 VDC Motors. (Left & Right)
• 36 Position quadrature encoder set
• Two motor bearing blocks.
• Two Main rims
• Two rim rings
• Two robot drive axle’s
• Two 1/8 x 1” Roll Pink
• Two Knobby tires with rubber tube
• Two 0.5 ID x 1.125” OD Ball Bearing
• Two Hex keys (5mm & 5/32”)
• All screws and spacers.
This is only the wheel kit, to have a fully functioning robot you will need the below kits.
Base Kit: 8430822
Top Kit: 8430796
Supplied with
All necessary screws and spacers