SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

RS Stock No.: 131-1336Brand: SEGGERManufacturers Part No.: 8.07.01 SWD Isolator
brand-logo
View all in Development Tool Accessories

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Stock information temporarily unavailable.

181.742 OMR

181.742 OMR Each (ex VAT)

190.829 OMR

190.829 OMR Each (inc. VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

1

Available in multiples of 1
1181.742 OMR
2345.334 OMR
3518.001 OMR
4690.668 OMR
5863.335 OMR
61,036.002 OMR
71,208.669 OMR
81,381.336 OMR
91,554.003 OMR
101,726.670 OMR
111,899.337 OMR
122,072.004 OMR
132,244.671 OMR
142,417.338 OMR
152,590.005 OMR

181.742 OMR

181.742 OMR Each (ex VAT)

190.829 OMR

190.829 OMR Each (inc. VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
Stock information temporarily unavailable.

1

Available in multiples of 1
1181.742 OMR
2345.334 OMR
3518.001 OMR
4690.668 OMR
5863.335 OMR
61,036.002 OMR
71,208.669 OMR
81,381.336 OMR
91,554.003 OMR
101,726.670 OMR
111,899.337 OMR
122,072.004 OMR
132,244.671 OMR
142,417.338 OMR
152,590.005 OMR

Stock information temporarily unavailable.

Please check again later.

QuantityUnit price
1 - 1181.742 OMR
2+172.667 OMR

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET