SMC Push Button 3/2 Pneumatic Manual Control Valve VR51 Series, 2.5mm, III B
Technical Document
Specifications
Brand
SMCControl Mechanism
Push Button
Function
3/2
Thread Size
2.5mm
Manufacturer Series
VR51
Maximum Operating Pressure
1 MPa
Body Material
Die Cast Aluminium
Maximum Flow Rate
1L/s
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+60°C
Number of Ports
3/2
Model Number p
III B
Country of Origin
Japan
Product details
Two-Hand Control Unit and Separate Control Valve
Two-Hand Control Unit
The polymer enclosure two-hand control unit (stock no. 410-501) incorporates protective guards, two 40mm diameter pushbuttons and a control module. The ergonomically-designed unit enables safe operation of machinery and guards against accidental operation. The two-hand control unti conforms to EN574 and EN954-1 requirements.
Two-Hand Control Valve
The VR51 Two-Hand Control Valve (stock no. 686-2719) may be installed in pneumatic control systems in much the same way as the Two-Hand Control Unit to prevent unsafe operation of machinery while one or both hands may be free to encroach into unsafe machine working areas. The VR51 can be installed, set up and configured as part of a safety circuit, for example, between two pushbutton-operated valves, an air-operated valve and a pneumatic cylinder, within a pneumatic control system.
Standards
EN 574 and EN 954-1
Stock information temporarily unavailable.
Please check again later.
163.500 OMR
Each (ex VAT)
171.675 OMR
Each (inc. VAT)
1
163.500 OMR
Each (ex VAT)
171.675 OMR
Each (inc. VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | 163.500 OMR |
| 5 - 9 | 153.885 OMR |
| 10+ | 147.475 OMR |
Technical Document
Specifications
Brand
SMCControl Mechanism
Push Button
Function
3/2
Thread Size
2.5mm
Manufacturer Series
VR51
Maximum Operating Pressure
1 MPa
Body Material
Die Cast Aluminium
Maximum Flow Rate
1L/s
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+60°C
Number of Ports
3/2
Model Number p
III B
Country of Origin
Japan
Product details
Two-Hand Control Unit and Separate Control Valve
Two-Hand Control Unit
The polymer enclosure two-hand control unit (stock no. 410-501) incorporates protective guards, two 40mm diameter pushbuttons and a control module. The ergonomically-designed unit enables safe operation of machinery and guards against accidental operation. The two-hand control unti conforms to EN574 and EN954-1 requirements.
Two-Hand Control Valve
The VR51 Two-Hand Control Valve (stock no. 686-2719) may be installed in pneumatic control systems in much the same way as the Two-Hand Control Unit to prevent unsafe operation of machinery while one or both hands may be free to encroach into unsafe machine working areas. The VR51 can be installed, set up and configured as part of a safety circuit, for example, between two pushbutton-operated valves, an air-operated valve and a pneumatic cylinder, within a pneumatic control system.
Standards
EN 574 and EN 954-1