Technical Document
Specifications
Brand
EMERSON ? ASCOSupply Voltage
230 V ac
Number of Ports
3
Connection Size
1/8in
Connection
1/8 in G Female
Operation
Direct
Default Valve Position
NC
Suitable Applications
Air, Inert Gas, Oil, Water
Type
3/2
Orifice Diameter
1.6mm
Series
356
Body Material
Brass
Maximum Working Pressure
10 bar
Operating Temperature Range
-10 → +60 °C
Maximum Operating Temperature
+60°C
Connection Gender
Female
Minimum Operating Temperature
-10°C
Thread Standard or Connection Type
G
Maximum Opening Time
10ms
Maximum Closing Time
10ms
Flow Factor Kv
0.08m³/h
Country of Origin
United Kingdom
Product details
Three-way, Zero Pressure, N/C Valves
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.
Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Stock information temporarily unavailable.
Please check again later.
35.480 OMR
35.480 OMR Each (ex VAT)
37.254 OMR
37.254 OMR Each (inc. VAT)
1
35.480 OMR
35.480 OMR Each (ex VAT)
37.254 OMR
37.254 OMR Each (inc. VAT)
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 4 | 35.480 OMR |
5+ | 34.380 OMR |
Technical Document
Specifications
Brand
EMERSON ? ASCOSupply Voltage
230 V ac
Number of Ports
3
Connection Size
1/8in
Connection
1/8 in G Female
Operation
Direct
Default Valve Position
NC
Suitable Applications
Air, Inert Gas, Oil, Water
Type
3/2
Orifice Diameter
1.6mm
Series
356
Body Material
Brass
Maximum Working Pressure
10 bar
Operating Temperature Range
-10 → +60 °C
Maximum Operating Temperature
+60°C
Connection Gender
Female
Minimum Operating Temperature
-10°C
Thread Standard or Connection Type
G
Maximum Opening Time
10ms
Maximum Closing Time
10ms
Flow Factor Kv
0.08m³/h
Country of Origin
United Kingdom
Product details
Three-way, Zero Pressure, N/C Valves
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.
Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.