ifm electronic Threaded Barrel Proximity Sensor, M30, 10 mm Detection, 10 → 36 V dc
Technical Document
Specifications
Brand
ifm electronicThread Size
M30
Detection Range
10 mm
Body Style
Barrel
Supply Voltage
10 → 36 V dc
Length
81mm
IP Rating
IP67
Mounting Type
Flush
Housing Material
PBT
Maximum dc Voltage
36V
Minimum Operating Temperature
-25°C
Short Circuit Overload Protection
Yes
Maximum Operating Temperature
+80°C
Switching Current
250 mA
Reverse Polarity Protection
Yes
Country of Origin
Germany
Product details
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
ifm electronicThread Size
M30
Detection Range
10 mm
Body Style
Barrel
Supply Voltage
10 → 36 V dc
Length
81mm
IP Rating
IP67
Mounting Type
Flush
Housing Material
PBT
Maximum dc Voltage
36V
Minimum Operating Temperature
-25°C
Short Circuit Overload Protection
Yes
Maximum Operating Temperature
+80°C
Switching Current
250 mA
Reverse Polarity Protection
Yes
Country of Origin
Germany
Product details
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.