SKF 1200 ETN9 Self Aligning Ball Bearing- Open Type 10mm I.D, 30mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
10mm
Outside Diameter
30mm
Race Width
9mm
Ball Bearing Type
Self Aligning Ball Bearing
Sealing Arrangement
Open Type
Bearing Clearance
CN
Material
Steel
Ball Material
Steel
Cage Material
Non-metallic
Number of Rows
2
Static Load Rating
1.18kN
Dynamic Load Rating
5.53kN
Bore Type
Parallel
Bearing Series
2 Light
Flange Outside Diameter
30mm
Race Material
Steel
Partial Bearing Code
1200
Race Type
Plain
Country of Origin
Switzerland
Product details
Double Row Self - Aligning
Radial Self-Aligning Ball Bearing
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).
Open Bearings
ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.
Sealed bearings
2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.
TN suffix denotes polyamide cage
Supplied with
instruction leaflet.
Stock information temporarily unavailable.
Please check again later.
11.075 OMR
Each (ex VAT)
11.629 OMR
Each (inc. VAT)
1
11.075 OMR
Each (ex VAT)
11.629 OMR
Each (inc. VAT)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | 11.075 OMR |
| 5 - 9 | 10.770 OMR |
| 10 - 24 | 10.470 OMR |
| 25+ | 10.350 OMR |
Technical Document
Specifications
Brand
SKFInside Diameter
10mm
Outside Diameter
30mm
Race Width
9mm
Ball Bearing Type
Self Aligning Ball Bearing
Sealing Arrangement
Open Type
Bearing Clearance
CN
Material
Steel
Ball Material
Steel
Cage Material
Non-metallic
Number of Rows
2
Static Load Rating
1.18kN
Dynamic Load Rating
5.53kN
Bore Type
Parallel
Bearing Series
2 Light
Flange Outside Diameter
30mm
Race Material
Steel
Partial Bearing Code
1200
Race Type
Plain
Country of Origin
Switzerland
Product details
Double Row Self - Aligning
Radial Self-Aligning Ball Bearing
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).
Open Bearings
ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.
Sealed bearings
2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.
TN suffix denotes polyamide cage
Supplied with
instruction leaflet.